FLASH ARM

FLASH ARM 简介
FLASHER ARM主要是为了针对微处理器片上或是外部Flash和ARM内核的编程工具。
为烧写Flash目标而设计了J-Flash 和 Stan-alone。Flasher ARM具有所有J-Link的功能。
通过USB或是RS232串口连接PC。可运行在Microsoft Windows 2000, Windows XP, Windows 2003 ,Windows Vista，Windows 7,Windows 8或Windows 10。 内置有20引脚的JTAG连接器, 此连接器与ARM标准20引脚连接器兼容。 通常ARM闪存器支持外部闪存编程， 如并行NOR闪存， 串行NOR闪存， NAND闪存和数据闪存。 ARM闪存器可通过自动测试器远程控制， 不需连接至电脑和ARM闪存器电脑程序， 产品自身配有额外的硬件控制功能。

Flasher ARM 品牌：segger

Flasher ARM产地：美国
 

功能特征：

1. ?独立式JTAG/SWD编程器

2. ?以太网接口

3. ?支持内部和外部闪存设备

4. ?2年免费支持软件升级

5. ?64MB存储器用于存储目标程序

6. ?支持串行与目标程序

7. ?数据文档可升级为海量存储或通过J-Flash

8. ?目标接口有：JTAG/SWD

9. ?通过USB供电,不需其它电源

10. ?可被用做J-Link (JTAG仿真器), 下载速度高达720K字节/妙

11. ?编程速度介于30K字节/秒至300K字节/秒, 具体视目标硬件而定

12. ?不使用 PC program可通过ASCII命令直接控制Flasher 

Flasher ARM

Flash Programmer for ARM and Cortex cores

Flasher ARM is a programming tool for microcontrollers with on-chip or external Flash memory and ARM core. Flasher ARM is designed for programming flash targets with the J-Flash software or stand-alone. In addition to that Flasher ARM has all of the J-Link functionality. Flasher ARM connects via USB, Ethernet or via RS232 interface to a PC, running Microsoft Windows 2000, Windows XP, Windows 2003, Windows Vista, Windows 7, Windows 8 or Windows 10 and has a built-in 20-pin JTAG connector, which is compatible with the standard 20-pin connector defined by ARM.

Features

·Stand-alone JTAG/SWD programmer (Once set up, Flasher can be controlled without the use of PC program)

·Ethernet interface

·Supports internal and external flash devices

·Wide range of devices are supported. For a complete list, 

·Free software updates1, 2 years of support

·64 MB memory for storage of target program

·Serial in target programming supported

·Data files can be updated as mass storage or via J-Flash

·Target interface: JTAG / SWD

·No power supply required, powered through USB

·Can be used as J-Link (JTAG emulator) with a download speed of up to 1 MByte/second

·Programming speed typically between 30 KB/second and 1 MByte/second. Max. programming speed highly depends on target hardware and max. programming speed of the flash itself

·ASCII command interface to control Flasher without the use of PC program

·Authorized Flashing allows to limit the number of flash programming cycles and to protect the Flasher against non-authorized access in case of external production.